The software should have a mode that shows you data in real time, similar to a traditional oscilloscope.

Just "live" logic probe to observe slow signals at digital channels.

Add support for the "1-Wire-like" protocol used by temperature/humidity sensors, such as DHT11, DHT21, DHT22, RHT03, AM2302 etc.

Imagine logging a I2C (or SPI) communication. You get some transaction, then (sometimes) nothing is hapenning for a long time until next transaction. I would like to have an option not to display (scroll through) the steady state of the logged sig...

Add a capture mode that keeps the last "X" samples or "X" seconds worth of data, and discards any data before this period. I am watching an I2C line, and if everything goes well, there will be traffic every 1 second. I am interested in this traf...

Searching through decoded protocols for multiple bytes patterns When searching through the decoded patterns, I'd like to be able to search for multi-byte patterns. I.E. when I've decoded a channel for Async Serial, and I enter 0xFB10 as a search t...

Software should allow for specifying a trigger condition based on a protocol result.

If you need to trigger on a rare event, there is no reason why the software should be parsing the ongoing data looking for the trigger. The software should tell the hardware what event to look for, then let it handle the trigger. With the curren...

The ability to inject data makes the creation of tightly controlled test cases simpler and quicker. This also opens up the door for the Logic as a valid production test tool. So often I've wanted just to hit a button and send a data stream down t...

Before releasing beta for software with analog support, you should release a stable version for Digital Logic analyzers(Logic8 and Logic16). As of now, latest beta releases of logic software are not stable and oftentimes crash. Also, the UI is not...