Add protocol analyzer for the WS2812, a.k.a. NeoPixel etc, RGB LED's.

An unlabeled black wire should always be ground, no matter what.

It would be great to have cursors so that i can measure between 2 channels. have the delta display like you do the pulse widths.

Default name of the measurement or the annotation should be the same as the channel being measured.

Most ARM CPUs now use a 2-wire SWD interface rather than a JTAG interface so a decoder would be a good idea (mmmm, I'm debugging a debug interface)

USB, at least at 1.5 Mbit and 12 Mbit, would be pretty easy to add analyzers for. 480 Mbit might be harder, even for the Pro (but it would be sweet!) There is a suggestion that conflates HDMI and USB into a single suggestion. I think USB is much m...

The software should be optimized so that Mac OSX graphical performance is at least as good as Windows or Linux.

The software should allow you to easily count the number of pulses or transitions between specified points.

With the Logic 16, we could capture up to 3 channels at 100MS/s, then up to 6 at 50MS/s, then 7 at 40MS/s, 8 at 32MS/s, etc... With the Logic Pro 16, the max capture speed is either 500MS/s for up to 4 channels or 100MS/s for 5 to 16 channels. If...

Protocol analyzer results should be viewable in an Excel-style list view that can be filtered and searched.