The software should have a white-background view mode so it can be used for generating printed documentation.

It's not clear how/if the third party ones work on Windows.

Is there a way to trim the large logic data files? Because we are capturing data to identify when the problem happens. We are interested only in the last few minutes of data. We will save emailing hundreds of Mega bytes. If trimmed, it will becom...

Currently SPI protocol analyzer only seems to capture single bytes on the SPI bus. It would be useful to be able to capture the whole frame (=from chip select to deselect). In this case, only frame start timestamp would be necessary. So if export...

A plugin for serial analyzers that allows various checksum/CRC calculations on bytes that are selected using measurement bars. This is literally invaluable if you are debugging / reverse engineering protocols.These would be great:1 byte checksumCR...

I'd like to be able to simply select an analog channel to run an existing protocol analyzer on. It would effectively convert the analog data to digital data and run the analyzer as-is, support for analyzing analog data would be even nicer but a m...

Being able to use wireshark dissectors for protocol debugging is an indispensable tool. When developing transceiver or MAC layer communications it would be a great help to feed data directly into wireshark as a live stream.

Add multiple slave selects and Data/Command signal for SPI analyzer At the moment there is only one Enable signal for SPI. I would like to see at least 3 enable signals in case multiple sensors and devices are connected to one SPI channel. Opti...

Allow time markers A1 and A2 to be moved as a pair (keeping interval between them) along the signal, this is very useful when trying to check is one signal is the same timing as another or for splitting bits from a message